Dynojet Power Commander V Installation Instructions page 4

FIG.D
FIG.E
Unplug
FIG.F
Stock
Stock
I21-004
PCV
PCV
www.powercommander.com
9 Plug the PCV harness in-line of the stock wiring harness and crank position
sensor harness (Fig. D).
10 Locate the Throttle Position Sensor connector. Unplug this connector (Fig. E).
This is a BLACK 3-pin connector pair located to the right and rear of the throttle
bodies just inside the frame rail.
11 Plug the PCV wiring harness in-line of the stock TPS connectors (Fig. F).
12 Reinstall the fuel tank and the seat.
2008-2012 Triumph Street Triple 675 - PCV - 4