Basic Operation; Telephone Operation; Handset Operation - VTech t2351 User Manual

Telephone Operation

Handset Operation

. Make a Call
Press before or after dialing number to place a call
2. Flash/Call Waiting
Press to begin a call, then dial a number During a call,
press to receive an incoming call, if call waiting is activated
3. Chan
While on a call, press CHAN to switch to a clearer channel
4. Delete
Press to delete one or all calls in the call log See page 20 for
complete instructions
. Answer a Call (any key)
Press any key (except OFF) to answer a call
6. Handset Volume
Adjust the volume while on a call A double beep will sound
when you reach the maximum or minimum setting
CID and DIR keys
• When phone is not in use, press
information
• When phone is not in use, press
entries
. Select
Press to confirm the highlighted option while in programming mode.
. Off
During a call, press to hang up While in programming mode, press to cancel an operation, back up,
or exit
9. Redial/Pause
Press to view redial memory While entering numbers, press and hold to insert a dialing pause
0. PROG
Press to enter programming mode
1,2
/CID to display caller ID
3,4
/DIR to display directory
www.vtechphones.com
5

BASIC OPERATION

6
7
8
10
9
9