Weight Stack - Life Fitness Axiom Series Assembly Instructions Manual

18. Thread cable end through the jam nut and into the head plate bayonet. See
NOTE: Check proper thread engagement. To do so, attempt to pass a 7mm Allen wrench through the portal in the
head plate bayonet. If it goes through, more threads are needed to meet the minimum requirement.
Correct Depth: Thread engagement exceeds minimum
19. Select either the LBS or KG weight stack label. Remove backing from label and apply to weight stack.
NOTE: One weight stack label sheet, LBS or KG, is used for both weight stacks.
20. Test the tower assembly.
21. Route cable out through hole at the bottom of tower side tube. Route cable through the lower pulley assembly.
depth.
Page 21 of 40
Cable Handling Guide
Item Description
1 Cable
2 Nut, M16 Hex Jam
3 Head Plate Bayonet
Incorrect Depth: Thread engagement not deep
enough.
Item Description
1 Weight Stack Label
2

Weight Stack

for details.
Qty.
1
1
1
Qty.
1
1