General ..........................9 2.3.2 Product-specific ........................ 10 Product description ..........................11 Knee control unit K-Control 4960 ....................11 Tabletop control unit K-Control 4965 ..................... 12 Foot control unit K-Control 4970 ....................13 Rating plates ..........................13 Technical Specifications ........................ 14 Scope of delivery ...........................
Page 4
Setting the speed ......................24 Troubleshooting ............................25 Accessories ............................. 26 Declaration of conformity ......................... 27 Replacement parts ..........................28 Knee control unit K-Control 4960 ....................28 Tabletop control unit K-Control 4965 ..................... 29 Foot control unit K-Control 4970 ....................30 2/30...
Instructions for use K-Control 4960,4965,4970 1 User instructions | 1.1 User guide 1 User instructions 1.1 User guide Requirement Read these instructions prior to first use to avoid misuse and prevent damage. 1.1.1 Abbreviations Abbre‐ Explanation viation Instructions for Use...
12 months from the date of purchase as confirmed by the salesperson. In case of justified complaints, KaVo will honour its warranty with a free replace‐ ment or repair.
4. Report the damage to the shipping company. 5. Report the damage to KaVo. 6. You must contact KaVo before returning a damaged product. 7. Send the signed delivery receipt to KaVo. If the product is damaged but there was no discernable damage to the packaging upon delivery, proceed as follows: 1.
Instructions for use K-Control 4960,4965,4970 1 User instructions | 1.4 Transportation and storage Note Failure on the part of the recipient to comply with one of the above obligations will mean that the damage will be considered to have arisen following delivery (in accordance with CMR law, Chapter 5, Art.
Instructions for use K-Control 4960,4965,4970 2 Safety | 2.1 Description of safety instructions 2 Safety 2.1 Description of safety instructions 2.1.1 Warning symbol Warning symbol 2.1.2 Structure DANGER The introduction describes the type and source of the hazard. This section describes the potential consequences of non-observance.
Any waste which is generated must be recycled or disposed of in a manner which is safe both for people and for the environment. This must be done in strict compliance with all applicable national regulations. Questions on proper disposal of the KaVo product can be answered by the KaVo branch. 2.2.2 Product-specific WARNING Injury or damage from damaged functional parts.
Only competent and trained personnel may use the product! This product has only been approved for use indoors. This KaVo product has been designed solely for dental technology, industrial and trade applications. Any other type of use is not allowed.
Instructions for use K-Control 4960,4965,4970 2 Safety | 2.3 Purpose – Intended use Germany To return an electrical device, proceed as follows: 1. At the homepage www.enretec.de of enretec GmbH, you can download a form for a disposal request under the menu item eom, or you can use it as an online request.
Instructions for use K-Control 4960,4965,4970 3 Product description | 3.1 Knee control unit K-Control 4960 3 Product description 3.1 Knee control unit K-Control 4960 Knee control unit K-Control 4960 ① "Speed" switch ⑦ Fuse holder with voltage adjustment ② Knee switching plate ⑧...
Instructions for use K-Control 4960,4965,4970 3 Product description | 3.2 Tabletop control unit K-Control 4965 3.2 Tabletop control unit K-Control 4965 K-Control tabletop control unit 4965 ① "Speed" switch ⑥ Fuse holder with voltage adjustment ② Mains switch ⑦ Motor socket (4-pin) ③...
5,000 rpm) ③ Starter socket for pedal switch (5- ⑥ Motor socket (4-pin) pin) 3.4 Rating plates Rating plate knee control unit K-Control 4960 Rating plate tabletop control unit K-Control 4965 Rating plate foot control unit K-Control 4970 13/30...
Instructions for use K-Control 4960,4965,4970 3 Product description | 3.5 Technical Specifications Type Device type Year of manufacture – serial number Material number GS mark CE mark VDE mark CSA mark Disposal instructions see also: Intended use Operating mode Follow instructions for use 3.5 Technical Specifications...
Page 17
Instructions for use K-Control 4960,4965,4970 3 Product description | 3.5 Technical Specifications K11 motor handpiece 1,000 - 40,000 rpm K12 motor handpiece 1,000 - 50,000 rpm K-ERGOgrip 1,000 - 50,000 rpm K-POWERgrip 1,000 - 50,000 rpm SF motor handpiece 5,000 - 60,000 rpm...
Instructions for use K-Control 4960,4965,4970 3 Product description | 3.6 Scope of delivery 3.6 Scope of delivery ▪ Knee control unit K-Control 4960: – Knee control unit – Mains cable – Instructions for use ▪ Tabletop control unit K-Control 4965 –...
Opening the chuck will lock the handpiece; in the event of unintentional opera‐ tion, the control will switch to error mode. The combination of the control unit and handpiece must be approved by KaVo. Note Do not cover the air vent.
Instructions for use K-Control 4960,4965,4970 4 First use | 4.2 Rated voltage – rated frequency In connection with the control units K-Control 4960 ①, 4965 ② and 4970 ③, the following handpieces can be operated: ▪ K-POWERgrip 4944 ▪ K5plus 4910 ▪...
Instructions for use K-Control 4960,4965,4970 4 First use | 4.3 Location ▶ Screw the mounting rail into place and attach the knee control unit to it. ▶ Plug the handpiece into the control unit and screw tight. ▶ Insert the power plug into an appropriate, easily accessible and properly in‐...
Instructions for use K-Control 4960,4965,4970 4 First use | 4.3 Location ▶ Plug the handpiece into the control unit and screw tight. Note For devices without integrated mains switch, the device can only be separated from the mains supply by pulling out the mains or device plug.
Page 23
Instructions for use K-Control 4960,4965,4970 4 First use | 4.3 Location ▶ Plug in the handpiece and 4620 pedal switch and screw tight. ▶ Insert the power plug into an appropriate, easily accessible and properly in‐ stalled and grounded mains socket outlet.
Opening the chuck will lock the handpiece; in the event of unintentional opera‐ tion, the control will switch to error mode. The combination of the control unit and handpiece must be approved by KaVo. 5.1 Operating the knee control and tabletop control 5.1.1 Setting the speed limit...
Instructions for use K-Control 4960,4965,4970 5 Operation | 5.2 Operating the foot control unit 5.1.4 Setting speed with tabletop control unit ▶ Set the desired maximum speed with the "Speed" switch ①. The speed is shown in display ②. ▶ Press down pedal switch ③.
Instructions for use K-Control 4960,4965,4970 5 Operation | 5.2 Operating the foot control unit ▶ Slide "Rotational direction" switch to "L" to set counterclockwise rotation. The speed is limited to 5,000 rpm. 5.2.3 Setting the speed ▶ Move foot lever to right to increase speed.
Instructions for use K-Control 4960,4965,4970 6 Troubleshooting 6 Troubleshooting Note On the knee control and the table-top unit, in addition to the error display, the word "ERROR" will also appear on the screen. The speed and torque displays will be hidden by this text. An error display (number) provides information about possible error causes.
Instructions for use K-Control 4960,4965,4970 9 Replacement parts | 9.1 Knee control unit K-Control 4960 9 Replacement parts 9.1 Knee control unit K-Control 4960 0.200.6529 0.200.6528 0.245.5015 0.642.0272 0.642.0252 0.260.9677 0.642.0282 0.642.0561 F 6,3A 250V 0.221.91 16 0.223.2801 0.223.0050 0.223.2735 0.642.0661...
Instructions for use K-Control 4960,4965,4970 9 Replacement parts | 9.2 Tabletop control unit K-Control 4965 9.2 Tabletop control unit K-Control 4965 0.245.5015 0.200.6529 0.200.6528 0.642.0272 0.617.0460 1,8 m 0.617.0410 1,0 m 0.223.2085 0.642.0561 0.224.7001 0.617.051 1 0.223.21 11 0.220.0423 0.223.0050 F 6,3A 250V 0.223.2735...
Instructions for use K-Control 4960,4965,4970 9 Replacement parts | 9.3 Foot control unit K-Control 4970 9.3 Foot control unit K-Control 4970 0.642.0572 0.642.0572 0.221.91 10 0.642.0582 0.223.2059 0.642.0582 F 6,3A 250V 0.223.2801 0.642.0641 0.221.4909 0.223.2735 T 4.0A 0.201.7127 0.642.0661 0.696.0221 0.258.6010...
Need help?
Do you have a question about the K-Control 4960 and is the answer not in the manual?
Questions and answers