Table of Contents
Advertisement
Safety Precautions
CAUTION
The operating environment for this product is 10 - 40°C (75 - 104ºF),, humidity is 30 - 75% RH,, and air
pressure is 700 - 1,060 hPa. Also, use the controller in a non-condensing environment. If used beyond this
range, it may cause malfunctions or damage.
Store the product in a place where the temperature is between 10 - 50°C, degrees Celsius, the humidity is
between 30 - 75% RH, the air pressure is between 500 and 1,060 hPa, and there is no dust, sulfur or salt air.
When installing the controller, provide a space of 10 cm behind the controller to allow for smooth insertion and
removal of the power cord in the event of an emergency.
Before starting to use the product, please inspect it in advance and make sure that there is nothing wrong. If you
notice any abnormality, contact your dealer for repair.
If the tool, tip holder or handpiece becomes hot or if a strange noise occurs suddenly during use, stop using it
immediately and check the entire system. If the tool is damaged, do not continue to use it and replace it with a
new tool.
NOTICE
This product uses an ultrasonic oscillator. The proximity of computers and LAN cables may affect them. Also, if
there is a radio receiver nearby, there may be noise.
When in use, if the operation sounds peculiar to ultrasonic vibration is generated. We recommend that you wear
earplugs.
Set the power switch to OFF after use. Also, unplug the power cord when not in use for long periods of time.
The user is responsible for operation and maintenance.
28
Advertisement
Table of Contents
