Table of Contents
Advertisement
6 – 2
Setting the forced stop time when not in use
This function forces the handpiece to stop if the handpiece has been left unused with the ON / OFF
key turned on.
Press the DOWN key to change the setting value.
6 – 3
Setting the notification volume
Press the DOWN key to change the setting value.
6 – 4
Setting the amplitude display and WATT display
The LED display can be switched between "Amplitude" and "WATT".
Press the DOWN key to change the setting value.
The Indicator shows the following order
"
"
"
"
"
"
No setup time
one minute
2 minutes.
The Indicator shows the following order
"
"
"
"
"
"
No sound.
Notification tone.
Loud notification (default setting)
The Indicator shows the following order
"
"
"
"
"
"
Amplitude display (default
setting)
Displayed in 1W increments
0.Displayed in 1W increments
The "WATT" will be displayed when the "
display in W units.
41
"
"
"
"
"
"
3 minutes. (factory setting)
5 minutes.
10 minutes.
"
"
...
"
"
...
" and "
Setup
"
"
...
" are set to
Advertisement
Table of Contents
