Table of Contents
Advertisement
Preparation before use
3 – 4
Tool installation
1
A test horn is attached to the handpiece when it is
shipped. Turn the protector sleeve and remove it.
①
②
One piece tool (M6 x 0.9)
1
Attach the One piece tool (M6 x 0.9) to the
handpiece and tighten firmly using two wrenches
(10mm).
2
Remove the test horn using the two wrenches
(10mm).
2
Insert the protector sleeve into the handpiece and
turn it to install it.
①
②
34
Advertisement
Table of Contents
