Table of Contents
Advertisement
Ceramic fiber grindstone, tip type
1
Attach the tip holder to the handpiece and tighten
firmly with two wrenches (10mm).
2
Insert the ceramic fiber grindstone wheel and tip into
the tip holder and tighten the set screw firmly with
the attached hexagon wrench.
②
①
If the tool and tip holder are loosely tightened, not only does it not produce enough vibration, but it can also cause
abnormal noise and abnormal heat generation. Be very careful to make sure it is securely tightened.
3
Insert the potector sleeve into the handpiece and
turn it to install it.
①
②
CAUTION
35
Preparation before use
Advertisement
Table of Contents
