Table of Contents
Advertisement
How to install a ferrite core
When using a foot switch, the attached ferrite core must be
attached. If it is used without being attached, electrical noise
(mainly electromagnetic waves) may cause adverse effects such
as malfunction on other adjacent equipment.
1
Insert the cord into the open ferrite core as shown below.
Carefully close the ferrite core, taking care not to interfere
with the cord (you will hear a snapping sound and two
locks). (The part must be securely closed).
2
Pull the cord so that it does not sag and adjust the position
of the ferrite core so that it is within 30 cm of the end of the
cord.
Within
30cm
2020.XX.XX 005 N
Advertisement
Table of Contents
