Table of Contents
Advertisement
symptoms
The LED on the
The vibration is
ON / OFF key is
weak.
on.
The LED on the
Strange noises or
sudden heat
ON / OFF key or
buildup in the
the LED for
handpiece.
ERROR is on.
The LED on the
ON / OFF key
does not light up.
No vibration when
using the foot
switch.
The LED on the
ON / OFF key or
the LED for
ERROR is on.
checklist
No standard tools are used.
Loose tools.
The Power level indicator is
in the minimum position.
UNCLAMP key / CLAMP key
is in CLAMP mode.
Loose tools.
Broken or bent tools.
No standard tools are used.
Tip holder is used in
UNCLAMP mode.
When using the clamping
tool, the mounting length is
not correct.
The foot switch is not plugged
in properly.
The handpiece plug is not
fully connected to the
Handpiece socket.
Faulty foot switch.
Disconnection of the output
cord.
Defects in the ultrasonic
transducer or controller.
Defects in the ultrasonic
transducer or controller.
cause
45
Trouble-shooting
countermeasure
Replace it with a standard
tool.
Retighten the tool.
Adjust the UP and DOWN
keys to the output appropriate
for your work.
Set to UNCLAMP mode.
Retighten the tool.
Replace the tool.
Replace it with a standard
tool.
Set to CLAMP mode.
Adjust the length.
Make sure the foot switch is
plugged in correctly.
Connect the plug of the
handpiece to the handpiece
connection socket securely.
Please send it to us.
Advertisement
Table of Contents
