Sensor / Button - Canon imageFORMULA P-208 Service Manual With Parts Catalog

CHAPTER 5 TROUBLESHOOTING

2. Sensor / Button

This mode is used to check the opera-
tion of sensors and button.
When the sensor detects its target, the
corresponding mark lights.
Example: The cover sensor is detected.
Figure 5-240
The display screen is divided into
"Front" and "Back". When the mouse cursor
is placed on each sensor, the sensor name
appears.
1) Front (including the operation section)
Regist sensor
Document sensor
Cover sensor
Figure 5-241
If you open the pickup tray, the cover
sensor lights up.
If you place paper on the document
sensor, the document sensor lights up.
If you open the upper unit, the door
sensor lights up.
If you close the upper unit when paper is
caught, the registration sensor lights up.
If you press the Start, the corresponding
mark lights up.
5-22
2) Rear
corresponding mark lights up.
Start button
Door sensor
COPYRIGHT © CANON ELECTRONICS INC. 2012
Auto start switch
Figure 5-242
If you turn the Auto Start switch ON, the
CANON P-208 FIRST EDITION