Canon imageFORMULA P-208 Service Manual With Parts Catalog page 70

CHAPTER 5 TROUBLESHOOTING
A list of the modes is show below.
No. Component/display name
1 Information
2 Scanner name
3 Firmware version
4 Serial number
5 Counter
6 Write file
7 Edit
8 Cancel
9 Apply
10 Adjustment
11 All
12 Registration (Auto)
13 Registration (Manual)
14 Light
15 Regist sensor
16 Edit
17 Cancel
18 Apply
19 Motor/Sensor
20 CIS LED
21 Front
22 Back
23 Main motor
24 Firmware
25 Firmware version
26 Version up
27 Registered firmware
28 Version up
5-4
Scanner name display
Current firmware version display
Display the serial number of the main body.
Display and change an accumulated number of fed
sheets, replacement parts counter, etc.
Save the above information on the computer.
Change the serial number and counter values.
Cancel the changed value.
Save the changed value.
Adjust the Registration (Auto), Light and Regist sensor.
Automatic adjustment of the reading start position
Manual adjustment of the reading start position
Adjust the shading correction value.
Registration sensor adjustment
Registration (Manual) value change
Cancel the changed value.
Save the changed value.
Check the lighting of the LED on the reading unit.
Check detection of the cover/registration/documents/
door sensor and start button.
Check the Auto Start Switch ON/OFF.
Operation check of the main motor
Current firmware version display
Version upgrade from unregistered firmware
Content display and selection of registered firmware
Version upgrade from registered firmware
Table 5-201a
COPYRIGHT © CANON ELECTRONICS INC. 2012
Function
CANON P-208 FIRST EDITION