Performing A Self Test - Miele F 2411 Vi Operating And Installation Instructions

Selecting additional settings
Performing a Self test 
Perform a Self test
that your refrigeration appliance is not
working properly and want to check if it
is suffering from any problems.
 In Settings mode , use the 
and  sensor controls to select
and select OK to confirm your
test
selection.
 Touch the  sensor control if you
wish to terminate the process.
The starts and the refrigeration
Self test
appliance is checked for any faults or
malfunctions.
- The message System restart
appear on the display if the self test
does not discover any faults or
malfunctions.
- If the self test does discover any
faults or malfunctions, they are
indicated as error messages on the
display.
An alarm will also sound.
 If you find the alarm disruptive, you
can switch it off in advance by
touching the  sensor control.
 Make a note of the error message(s)
displayed.
 Contact your Miele Dealer and inform
them of the error message(s) on the
display.
 Confirm the message with OK.
System restart will appear on the display.
The refrigeration appliance briefly
switches off and then back on
automatically.
68
if you are concerned
Self
will
Self test completed
display.
 Confirm the message with OK.
The main screen will appear on the
display again.
will appear on the