Hayter LT322 Instruction Manual And Parts List page 22

1.22
REFITTING THE BEACON
17. Re-connect the battery, first the positive (+ve) and then the (-ve).
18. Rotate the ignition switch to the 'I' position. Depress the beacon switch and check that the beacon rotates and flashes
correctly.
19. Finally replace the operator platform securing bolts and torque to the correct settings. (Refer to LT322 or LT324
Operators Manual - Code P Models)
19 . Close the operator platfrom and secure in place with the platform latching mechanism. (Refer to LT322 or LT324
B
Operators Manual - Code S Models)
BEACON ASSEMBLY
Continued.
1.22