15. Fitting The Railing - Konig + Neurath Basic 4 Desk Assembly Instructions Manual

15. Fitting the railing

(a) (b)
Remove cover (a).
Mount profile (b) onto adap-
ter (c) by using cylinder head
screws M6x20 (SW5).
Note: pre-assembled adap-
ters must be disassembled.
(c)
Remove end cap (d).
Insert counter plate (e), only
for desk top 13 mm.
Mount adapter on the
bracket (f) , by using cylinder
head screws M6x10 (SW5).
Insert cable clip (g) into pro-
file groove.
(e)
(d)
(f)
(g)
26