PC Card LEDs
3Com 10/100 LAN CardBus PC Card User Guide
PC Card LEDs
PC Card LEDs
Before the PC Card and cable LEDs (shown here) can be used for troubleshooting, the PC Card must be
connected to the network and the driver must be installed.
LED
10 Mbps Good 10BASE-T connection
between PC Card and hub
100 Mbps Good 100BASE-TX connection
between PC Card and hub
file:///C|/aaafiles/Garfield 26/L10N/User Guide/Source/Final/New Folder/3C575-25.htm (1 of 2) [10/26/1999 9:00:42 AM]
On
No connection.
(Off when 100 LNK LED
is on.)
No connection.
(Off when 10 LNK LED
is on.)
Contents | Support | Knowledge Base | FAQ | Software | FTP
Off
There may be a problem
with your physical
connection. Check that all
cables are connected
securely.
Flashing