3Com 3CCFE575CT User Manual page 30

Setup Procedure
3Com 10/100 LAN CardBus PC Card User Guide
Setup Procedure
Setup Procedure
Setup With No Networking Installed
1. Insert the PC Card as described in "Installing the PC Card".
2. Turn the notebook on.
3. Double-click My Computer, double-click Control Panel, double-click Network.
4. When the system prompts: "Windows NT Networking is not installed. Do you want to install it
now?", click Yes. This opens the Network Setup Wizard.
If this message does not appear, go to Windows NT 4 with networking Installed and follow the
instructions.
5. Check Wired to the network and click Next.
6. When the system prompts to have setup start searching for a network adapter, click Select from
List.
7. Click Have Disk.
8. Insert the LAN Installation Disk in the floppy drive and click OK.
9. When the Select OEM Option window opens, select FE575C-3Com 10/100 LAN CardBus-Fast
Ethernet and click OK.
The Network Setup Wizard window appears.
10. Click Next.
11. In the Network Protocols list, place a check mark next to each network protocol required for your
site and click Next.
12. In the Network Services window, place a check mark in the box next to each desired service.
Select the default settings.
13. Click Next to install the selected components.
The message "Windows NT is ready to install networking" appears.
14. Click Next.
The Windows NT Setup windows asks for the location of the Windows NT installation files.
15. Enter the path to the Windows NT installation files (for example, D:\i386 on the NT CD) and click
file:///C|/aaafiles/Garfield 26/L10N/User Guide/Source/Final/New Folder/3C575-21.htm (1 of 3) [10/26/1999 8:59:36 AM]
Contents | Support | Knowledge Base | FAQ | Software | FTP