Setup For Windows; Installing The Pc Card; Confirming Installation; Uninstalling The Card - 3Com 3C3FE574BT User Manual

1

Installing the PC Card

Confirming
Installation

Uninstalling the Card

S
ETUP FOR
1 With the computer powered up and Windows 2000 running, insert the
Installation CD into the CD-ROM drive. The auto-start feature starts the
installation. If auto-start is disabled on your computer, click Start>Run and type
d:\setup.exe (where d: is your CD-ROM drive).
2 Connect the PC Card to the network as shown in Chapter 5.
3 Insert the PC Card into the PC Card slot.
After inserting the PC Card, if auto-start is enabled and nothing happens within
five seconds, reboot your computer and log in to Windows 2000. The installation
process will begin when the computer restarts.
4 Respond to the prompts as they appear.
During the installation process, you may receive prompts for the Windows 2000
installation CD. Insert the CD and indicate the correct path.
5 Restart your computer if prompted.
1 Double-click the My Computer icon.
2 Double-click the Control Panel icon.
3 Double-click the System icon. The System Properties box appears, detailing your
system setup.
4 Click the Hardware tab and then the Device Manager button. A list of devices
appears, arranged by type.
5 Double-click Network Adapters. The LAN card name appears, confirming
successful installation.
6 Double-click the entry for the LAN card to display a description of the card and its
current status. The device status should indicate "This device is working properly."
7 Click Cancel to return to System Properties.
8 Click OK to exit System Properties.
If the card installation is unsuccessful for any reason, your best course may be to
completely uninstall the LAN card and its software and repeat the installation
procedures. A fresh install can also solve problems that can arise from removing
the card or shutting off your computer while diagnostics were running.
W
INDOWS
2000