Toro 30370 Operator's Manual page 43

Figure 125
1. Access covers
40. Install the winter frame floor plate cover to the floor
with the screws previously removed (Figure 126).
Figure 126
1. Floor plate cover
41. Connect the cab pressure and return hoses to
the quick couplers on the rear frame mount
(Figure 127).
2. Mounting screws
1. Pressure hose
42. Remove the cap and plug the cab wire harness
connector into the harness on the rear frame mount
(Figure 128).
1. Cab wire harness
connector
43. Start the machine. Run the lift arm up and down
and check for hydraulic leaks. Check the antifreeze
level and replenish as required.
43
Figure 127
2. Return hose
Figure 128
2. Harness connector on the
rear frame mount