Toro 30370 Operator's Manual page 34

Figure 90
1. Drive shaft
2. Gear box
35. Route and connect the hydraulic pressure and tank
hoses to the valve (Figure 91).
Figure 91
1. Control valve
2. Tank hose
36. Install the rear of the deck lift cylinder onto the pivot
pin and secure with the retaining ring (Figure 92).
37. Secure the front of the lift cylinder to the mower
frame with the cylinder pin and screw (Figure 92).
3. Bolt
4. Roll pin
3. Pressure hose
1. Deck lift cylinder
2. Retaining ring
38. Remove the bolts and nuts securing the cab mount
supports to the ROPS posts (Figure 93).
1. ROPS post
39. Position the ROPS assembly onto the ROPS posts.
Install the bolt, nut, hair pin cotter and pin securing
each ROPS assembly to the ROPS posts (Figure 94).
34
Figure 92
3. Screw
4. Cylinder pin & screw
Figure 93
2. Cab mount support