Toro 30370 Operator's Manual page 36

Figure 97
1. Rear bumper tube
5. Install the vertical tube support assembly to each
rear corner of the deck frame with a clevis pin and a
5-16" self-tapping screw pin retainer (Figure 98).
Figure 98
1. Deck frame
2. Vertical tube support
6. Remove the retaining ring securing the rear of the
deck lift cylinder to the pivot pin (Figure 99).
2. Floor jack
3. Clevis pin & screw pin
retainer
1. Deck lift cylinder
2. Retaining ring
7. Remove the screw securing the front cylinder pivot
pin to the mower frame (Figure 99). Remove the
cable tie securing the pressure and tank hoses.
8. Remove the front pivot pin and slide the cylinder
off the rear pin (Figure 99). Let the cylinder hang
out of the way on the hoses (Figure 100).
1. Deck lift cylinder
9. Pivot open the floor plate (Figure 101) and secure
with prop rod.
36
Figure 99
3. Screw
4. Cylinder pin
Figure 100