Driving Safety
You drive the machine to and from the work site with the use
of a tethered remote. When driving the machine, observe the
following safety precautions:
•
Operate the drive pendant alongside the machine outside
of the danger zone
(Figure
•
Keep all bystanders away while moving the machine.
•
Do not carry passengers on the machine.
•
Watch for the turning-radius sweep of the drill frame, as
the center of the turning radius is the end of the track.
•
Moving the machine with the tethered remote can
be erratic; move slowly when using the remote for
movement.
X
1
1
1
1. 1.8 m (6 ft) safety distance
2. Operator
3).
3
2
3
Driving Danger Zone
•
Use care when loading or unloading the machine onto a
trailer.
•
Watch for traffic when crossing roadways.
•
Check for overhead clearances (i.e. branches, doorways,
electrical wires) before driving under any objects and do
not contact them.
•
When driving on a slope, the operator should be up-slope
from the machine.
The following illustration displays the safe distance that all
individuals must maintain while moving the machine.
Figure 3
3. Turning-radius center
4. 2.4 m (8 ft) safety distance
5
G021 118
4
4
4