Table of Contents
Advertisement
Drill Frame and Stabilizer Controls
1
Figure 19
1. Drill-frame tilt lever
2. Left-stabilizer lever
Stabilizer Levers
Use the stabilizer levers to raise and lower the stabilizers.
Note: The D
/D
RIVE
RILL
be switched to the D
RIVE
Drill-Frame Tilt Lever
Use the drill-frame tilt lever to tilt the drill frame to place
the stake-down plate on the ground or to return the frame
to the travel position.
Note: The D
/D
RIVE
RILL
be switched to the D
RIVE
2
3
g021843
3. Right-stabilizer lever
switch on the operator panel must
position for this function to work.
switch on the operator panel must
position for this function to work.
Drive Pendant
Refer to
Figure 17
for location.
1
1. Engine-speed switch
2. Drive-direction joystick
3. Engine-stop button
Engine-Stop Button
Press this button to immediately stop the engine and all
movement/drilling operations. You must pull this button out
before you can start the engine again.
Engine-Speed Switch
•
Press and hold the top of this switch to increase the
engine speed.
•
Press and hold the bottom of this switch to decrease the
engine speed.
•
Release the switch to maintain the current engine speed.
Drive-Direction Joystick
Use the joystick to control the direction of the machine. The
machine will travel in the direction you move the joystick.
28
3
2
4
5
g021855
Figure 20
4. Drive-speed switch
5. Operator-presence switch
Advertisement
Table of Contents
