Specifications; Attachments/Accessories - Toro 2024 Operator's Manual

Battery-Disconnect Switch
Open the front hood to access the B
switch; refer to Opening the Front Hood (page
The -
BATTERY DISCONNECT
the engine; it is used to electrically disconnect the battery
from the machine.
Turn the -
BATTERY DISCONNECT
position to perform the following:
•
To energize the machine electrically, rotate the
-
BATTERY DISCONNECT
position (Figure 23).
•
To de-energize the machine electrically, rotate the
-
BATTERY DISCONNECT
O position (Figure
FF
Figure 23
1. Battery-disconnect switch
(On position)
-D
ATTERY ISCONNECT
58).
switch is located to the right of
switch to the O
N
switch clockwise to the O
switch counterclockwise to the
23).
2. Battery-disconnect switch
(Off position)

Specifications

Note: Specifications and design are subject to change
without notice.
Machine
Width
Length
or O
FF
Height
Weight
N

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
Important: Use only Toro approved attachments.
Other attachments may create an unsafe operating
environment or damage the traction unit.
30
131 cm (51.5 inches)
525 cm (207 inches)
188 cm (74 inches)
4,765 kg (10,500 lbs)