Table of Contents
Advertisement
Exit-Side-Lockout System (Standard
Range)
The exit-side-lockout system provides the individuals working
around the machine with a means to disable the drill pipe
from rotating and thrusting.
For more information and instructions, refer to the Operator's
Manual for the Exit-side-lockout system.
Exit-Side-Lockout System (Long
Range)
The exit-side-lockout system provides the individuals working
around the machine with a means to disable the drill pipe
from rotating and thrusting.
For more information and instructions, refer to the Operator's
Manual for the Exit-side-lockout system.
Rear Control Panel
1
4
Figure 17
1. Engine-heating light
2. Engine, key switch
3. Fluid-pump switch
Engine-Heating Light
When the engine is cold, the heater warms the intake air to
enable easier starting. This light illuminates while the heater is
on. Wait until this light turns off before starting the engine.
2
3
5
g021837
4. Drill-pendant receptacle
5. Drive-pendant receptacle
Engine, Key Switch
The key switch has 3 positions as follows
1. Engine-off position
2. Engine-run position
•
Engine-off position—turn the key to this position to
stop the engine. The engine cannot be started from the
operator platform when the key is in this position.
•
Engine-run position—turn the key to this position after
starting the engine. Turning the key to this position
also enables the engine start button from the operator
platform.
•
Engine-start position—turn the key to this position to
start the engine. Release the key to the R
the engine has started.
Fluid-Pump Switch
Use this switch to turn on the fluid pump to use the spray gun
when cleaning the machine.
Drill-Pendant Receptacle
Plug the drill pendant into this receptacle to attach it to the
machine
(Figure
17).
Drive-Pendant Receptacle
Plug the drive pendant into this receptacle to attach it to the
machine
(Figure
17).
27
(Figure
1
2
3
G0221 15
Figure 18
3. Engine-start position
position once
UN
18):
Advertisement
Table of Contents
