Sample Numbering; Identification Of Sample Location - Macherey-Nagel PF-12 Manual

7.2. Sample numbering

To differentiate between samples, the PF-12 assigns a sample-number to every
measurement (starting with 0001). Subsequent measurements are numbered
accordingly. You have the option to change the sample-number after every
measurement and to assign it to the current result. To do so, press
the next measurement. An entry option appears to enter the 4 digit sample
number via the key-pad.
Once you have entered the sample-number, it is displayed together with all
other result data at the bottom of the display. The following measurements are
then automatically numbered. Generally, the sample-number starts with 0001
whenever you select a method .

7.3. Identification of sample location

To differentiate between sampling locations, you have the option to enter a sam-
ple location after performing a measurement (up to 12 characters). Press button
to open the entry option for the sample location. Once you have entered the
sample location, it is displayed together with all other result data at the bottom
of the display. If you have entered additional sample locations before, you can
press /
ously defined sample locations.
Edit
Press
tion with
entries.
Export
Press
with
the USB port.
Delete
Press
with
tion to delete the respective special method.
to choose or edit the sample location from a list of up to 20 previ-
/ to get to the edit sub-menu. Confirma-
allows you to edit all previously made
/ to get to the export sub-menu. Confirm
to send all previous entries to a computer via
/ to get to the delete sub-menu. Confirm
and also confirm the following security ques-
before
29