Table of Contents
Advertisement
10.2 Indicator LED
The indicator LED lights or flashes in blue, green or red to indicate the scanner status as described below.
The indicator LED lights in blue when:
• the scanner has read a bar code successfully, or
• bar code data read matches the master bar code data in the data verification mode.
The indicator LED lights in green when:
• the operation commanded by the magic key has been processed.
The indicator LED lights in red when:
• any scanning error has occurred in the scanner,
• the bar code data read does not match the master bar code data in the data verification mode or
• the bar code data read cannot be transferred due to an edit error in data editing.
The indicator LED flashes in red when:
• no master bar code data has been stored in the scanner in the data verification mode.
You can disable the indicator LED with the bar-coded parameter menu or configuration software (ScannerSetting).
10.3 Vibrator
The bar-coded parameter menu and configuration software (ScannerSetting) provide three configuration choices:
indicating successful scanning (OK), indicating an error (NG), and disabled.
"OK" vibrations: The vibrator operates to indicate any of the following OK conditions.
• Transmission of the bar code data read has been completed.
• In the data verification mode, the bar code data read matches the master bar code data.
"NG" vibrations: The vibrator operates to indicate any of the following failure conditions.
• Any scanning error has occurred.
• Bar code data read cannot be transferred due to an edit error in data editing.
39
Advertisement
Table of Contents
