Table of Contents
Advertisement
• Never use chemicals or organic solvents such as benzene and thinner to clean the housing. Do not
apply insecticide to the scanner.
Doing so could result in a marred or cracked housing, electrical shock or fire.
• Do not use the scanner with anti-slip gloves containing plasticizer.
The scanner housing may be broken, creating injuries, electrical shock, or fire.
• If the interface cable is damaged (e.g., exposed or broken lead wires), stop using it and contact your
nearest dealer.
Failure to do so could result in a fire or electrical shock.
Care and Maintenance
Dust or dirt accumulating on the clear plate of the bar code reading window will affect reading performance. If you use the
scanner in dusty areas, therefore, periodically check the clear plate and clean it if dusty.
• To clean the plate, first blow the dust away with an airbrush. Then wipe the plate with a cotton swab or the similar soft
one gently.
• If sand or hard particles have accumulated, never rub the plate; doing so will scratch or damage it. Blow the particles
away with an airbrush or a soft brush.
Limited Warranty on Software Products
In no event will DENSO WAVE be liable for direct, indirect, special, incidental, or consequential damages (including
imaginary profits or damages resulting from interruption of operation or loss of business information) resulting from any
defect in the software or its documentation or resulting from inability to apply the software or its documentation.
v
Advertisement
Table of Contents
