Mercury 300 XS OptiMax Manual page 90

Assembly
Floor Mount Kit
Bracket Assembly
POWER TRIM OPERATION (SINGLE-RAM SYSTEM)
The trim system has no trim out limits. Exercise care that engine is not trimmed
out beyond safe operation limits.
Trimming the outboard beyond a neutral steering condition may result in a
pull on the steering wheel or tiller handle and loss of boat control. Maintain
control of the boat if trimming beyond a neutral steering condition.
The outboard can be operated beyond the 20° trim limit if operating outboard in
shallow water as long as the engine RPM is kept below 1200 RPM.
Operating a boat in a trim up position can cause severe equipment damage
or loss of boat control. This product may not have a trim out limiting device or
trim indicator. Never trim up beyond the unit's side support flanges while the
boat is underway or at engine speeds above 1200 RPM.
TRIM IN PIN (SINGLE-RAM)
Install the trim stop pin to the desired adjustment hole in the heavy duty swivel
bracket. This pin is included with heavy‑duty models.
MAINTENANCE
Optional Accessories
Part Number
842109A01
87762A2
WARNING
!
WARNING
!
a - Trim In Pin
a
15280
84
eng