Introduction - Landoll 876 Series Operator's Manual

INTRODUCTION

The Landoll 876 Wing Series Tilloll is a quality product designed to give years of trouble free perform-
ance. By following each section of this manual, your system will perform as designed for you and your op-
eration.
SECTION 1
gives basic instructions on the use of this manual.
SECTION 2
gives product specifications. These specifications supply lengths and measures
for your equipment. A Standard Bolt Torque Table is provided to give guidelines
for bolt torques to be used when servicing this product.
SECTION 3
contains assembly instructions for your 876 Wing Series Tilloll. When these proce-
dures are correctly followed, your equipment should provide you years of trouble-
free operation and service.
SECTION 4
instructs how to operate your equipment before using it, and describes adjust-
ments needed. It also gives practical advice for the care and maintenance of your
Landoll equipment. Drawings in this section locate adjustment points on the
equipment.
NOTE: IF THE EQUIPMENT IS IMPROPERLY ASSEMBLED OR MAINTAINED, THE
WARRANTY IS VOID. IF YOU HAVE ANY QUESTIONS CONTACT:
SECTION 5
is a troubleshooting guide to aid in diagnosing and solving problems with the
equipment.
PARTS LIST
is a separate manual showing the various assemblies, subassemblies, and sys-
tems. Refer to that manual when ordering Landoll replacement parts. Order parts
from your Landoll dealer.
WARRANTY
The Warranty Registration form is included with the product documents. Fill it out
and mail it within 15 days of purchase. The Warranty is printed inside the front
cover.
NOTE: IMPROPER ASSEMBLY, MODIFICATION, OR MAINTENANCE OF YOUR
LANDOLL EQUIPMENT CAN VOID YOUR WARRANTY.
COMMENTS
Address comments or questions regarding this publication to:
LANDOLL CORPORATION
1900 NORTH STREET
MARYSVILLE, KANSAS 66508
or phone:
(785) 562-5381 or
(800) 428-5655
or FAX:
(785) 562-3240
LANDOLL CORPORATION
1900 NORTH STREET
MARYSVILLE, KANSAS 66508
ATTENTION: PUBLICATIONS -DEPT. 55
1
1-1