Advertisement
• Module Status
RX(n+0)0 through RX(n+0)F indicate whether individual I/O modules are mounted or not. The bit corresponding to the
mounted slot turns to "1," and the unmounted slot to "0."
• Error Status
RX(n+1)0 through RX(n+1)F indicate error status for each module as described below. The bit corresponding to such mod-
ule turns to "1."
R3-TSx, R3-RSx, R3-US4: Input burnout
R3-DA16A:
R3-YSx:
R3-PC16A:
• Data Error Status
RX(n+2)0 through RX(n+2)F indicate overrange (R3-US4: out of -10% to +110%; the other types: out of -15% to +115%)
status for each module. The bit corresponding to such module turns to "1."
• RX(n+3) through RX(n+6) are unused.
• RX(n+7)0 through RX(n+7)7 are reserved for future use. RX(n+7)B is assigned to Ready signal, which is turned to "1" when
the network module is in normal conditions. RX(n+7)8 through RX(n+7)A, RX(n+7)C through RX(n+7)F are not used.
RX(n+0) 0, RX(n+1) 0, RX(n+2) 0
RX(n+0) 1, RX(n+1) 1, RX(n+2) 1
RX(n+0) 2, RX(n+1) 2, RX(n+2) 2
:
RX(n+0) F, RX(n+1) F, RX(n+2) F
15
F E D C B A 9 8 7 6 5 4 3 2 1
RX(n+0)
RX(n+1)
RX(n+2)
RX(n+7)
Power input in error or disconnected
Output current error (e.g. load unconnected)
External power supply in error or disconnected
Module 1
Module 2
Module 3
:
Module 16
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
0
0
Module Status
Error Status (Burnout Bit)
Data Error Status
Unused
Reserved Bit
R3-NC1
EM-8355 Rev.15 P. 5 / 8
Advertisement
