Selecting A Cleaning Mode - Vorwerk Kobold VR300 User Manual

30
Figure 4.2 Normal cleaning mode
Operation
4.2

Selecting a cleaning mode

The Kobold VR300 Robot Vacuum Cleaner has two cleaning options: ALL
ROOMS (normal cleaning mode) and SPOT cleaning mode.
4.2.1 Normal cleaning mode (ALL ROOMS)
FUNCTION
The normal cleaning mode ALL ROOMS is pre-configured and is activated by
pressing the start button. As the standard cleaning mode, it is suitable for most
cleaning requirements.
• Start the cleaning process by pressing the start button on the robot vacuum
cleaner 1 (see Chapter "4.1.1 Switching on" on page 29).
In normal cleaning mode, the robot vacuum cleaner works in straight parallel
lines to ensure that your floors are cleaned as effectively as possible. It divides
larger rooms into areas of approx. 4 x 4 m. It starts by travelling along the outer
edge of the respective area and then cleans the inner section. It continues in this
way, one section at a time. When it has finished cleaning, it returns to the base
station.
Depending on the layout (furniture, doors, etc.), the robot divides the
room into various sub-areas and may initially leave out a sub-area and
return to it later, however, the entire floor area will be cleaned.
This can be optimised by moving the base station.