Normal Cleaning Mode; Selecting Cleaning Mode; ("Cleaning All Rooms") - Vorwerk kobold VR200 Instructions For Use Manual

1 2
Figure 3.5 Starting the robot vacuum
Figure 3.6 Normal cleaning mode
CLEANING ALL ROOMS
All Rooms
Spot
ECO
Figure 3.7 Selecting "Normal Cleaning"
Operation
3.3

selecting cleaning mode

For the cleaning process with your Kobold VR200 robot vacuum, you can use
"Normal Cleaning Mode" or "Spot Cleaning Mode".
3.3.1 normal cleaning mode ("cleaning all rooms")
Normal cleaning mode is preconfi gured and can be activated by pressing the
start butt on . As the standard cleaning mode, it is suitable for
most situations.
Start the cleaning process by pressing the start/stop butt on on the remote con-
trol 1 or the start/stop butt on on the robot vacuum.
In normal cleaning mode, the Kobold VR200 robot vacuum cleans your fl oors in
straight, parallel lines in order to ensure that they are cleaned as eff ectively as
possible. It divides larger rooms into areas of approx. 4 × 4 m. First it travels
around the outside of the respective area and then it cleans the inside. It pro-
ceeds this way, one section at a time. As soon as a room is fully cleaned, it moves
to the next one. When the robot vacuum is fi nished cleaning,"Finished! I'm
returning to my base station" is shown on the display and the robot vacuum
returns to the base station.
It generally passes around obstacles in the room clockwise.
How to change from another cleaning mode through the operator panel back
to normal cleaning mode:
Go to the Cleaning menu, select the Cleaning menu and confirm with the
•
selection button (OK).
2 .
25