Chapter 1: Important Safety Instructions - Delta Amplon RT Series User Manual

Chapter 1 : Important Safety Instructions
1.1 Safety Instructions
Installation Warnings
Before installation and usage, please read this User Manual thoroughly. This helps you to
use the product correctly and safely.
Install the UPS in a well-ventilated area, away from excess moisture, heat, dust, flammable
gas or explosives.
To avoid fire accidents and electric shock, please install the UPS in an indoor area free of
conductive contaminants and the temperature and humidity must be well-controlled. For the
temperature and humidity specifications, please refer to Appendix 1: Technical
Specifications.
Follow the IEC 60364-4-42 standard to install the UPS.
Leave adequate space (at least 50 cm (19.7")) at the front and rear of the UPS for proper
ventilation.
Connection Warnings
The UPS must be well grounded due to a possible risk of current leakage.
It is necessary to connect protective devices with the UPS when the UPS is connected to
power sources and critical loads.
The protection devices connected to the UPS must be installed near the UPS and must be
easily accessible for operation.
If you need to move the UPS or perform re-wiring, please turn off the AC input power and
disconnect the battery input to ensure that the UPS has been safely shut down. Otherwise,
the output end might still be energized, which might cause electric shock.
Usage Warnings
This is a class-A product. In a domestic environment, this product may cause radio
interference, in which case the user is required to take adequate measures.
The UPS can be used to power computers and associated peripheral devices, such as
monitors, modems, cartridge tape drives, external hard drives, etc.
It is strictly forbidden to connect the UPS with the following types of loads.
1. any regenerative loads (e.g. CNC machines and lifts)
Amplon RT Series
3