Get Server Parameter Values - Vivotek IP7151 User Manual

dido,
operator
6 [admin] anonymous, viewer,
dido,
operator, admin
7 N/A

Get server parameter values

Note: The access right depends on the URL directory.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/anonymous/getparam.cgi?[<parameter>]
[&<parameter>...]
http://<servername>/cgi-bin/viewer/getparam.cgi?[<parameter>]
[&<parameter>...]
http://<servername>/cgi-bin/operator/getparam.cgi?[<parameter>]
[&<parameter>...]
http://<servername>/cgi-bin/admin/getparam.cgi?[<parameter>]
[&<parameter>...]
where the <parameter> should be <group>[_<name>] or <group>[.<name>] If you
do not specify the any parameters, all the parameters on the server will be returned. If
you specify only <group>, the parameters of related group will be returned.
When query parameter values, the current parameter value are returned.
Successful control request returns paramter pairs as follows.
Return:
camctrl, camera's parameters except some privilege and
network options
Administrator's access right can fully control the
camctrl, camera's operation.
Internal parameters. Unable to be changed by
any external interface.
- 67 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532