Custom Command - Vivotek IP7151 User Manual

Custom command

The network camera provides five more custom commands other than general pan, tilt,
zoom and preset functions. Users can click on "Custom commands" and refer to the
instruction manual of the attached device to setup frequently used functions.
Please note that if "Custom camera" is selected as PTZ driver, user must configure the
custom pan, tilt, zoom, and focus functions via "Custom Command" page.
1. Select Custom
camera
2. Left click on "Custom
Command"
- 51 -
3. Configure the PTZF functions
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532