Maintenance And Service; Care And Maintenance - GE Vivid i SafeLock Cart Supplement To User’s Manual

Chapter 5

Maintenance and Service

Care and maintenance

•
•
•
•
•
•
•
•
Vivid i SafeLock Cart
5410856-100 Rev. 01
Maintenance and Service
Check all four SafeLock Cart wheels and castors
for wear.
Check the brakes on each of the two front
wheels. Make sure that pressing the brake locks
the wheel, preventing it from swiveling or rolling
and therefore stopping movement of the
SafeLock Cart.
Verify that releasing the brakes allows free
movement of the SafeLock Cart.
Check the SafeLock Cart raise/lower motion and
verify proper operation of the locking and
releasing mechanism.
Inspect the cart for dents, scratches, or cracks.
Inspect the probe holders for cracks or damage.
Clean the probe holders with warm water and a
damp cloth to remove all traces of gel (Soaking
may be required to remove excess gel.)
Check the power cord for cuts, loose hardware,
tire marks, exposed insulation or other
deterioration, and verify continuity. Tighten the
clamps that secure the power cord to the unit and
the outlet plug to the cord. Replace the power
cord and clamp, as required.
E
N
G
27