Table of Contents
Advertisement
Battery Life Indicator
The Q-Logic 3e Controller system uses pop-ups to indicate
the remaining battery life of the power chair. The system
will show information screens when the battery voltage
is at 50%, 30%, and 15%. If the pop-ups are not needed,
this feature can be disabled, using a programmer, such as
Econ-W or Econ-I, under the display settings.
Battery Charge 50%
Battery Charge 15%
Battery Charge 30%
BASIC OPERATION INSTRUCTIONS
Q-Logic 3e Error Codes
The Q-Logic 3e Controller displays two types of messages:
warning and error. See figure 4.
Warning: Alerts you to conditions that may affect power
„
chair functionality and performance.
Error: Alerts you to conditions that influence power chair
„
functionality and performance.
Error codes are displayed on the LCD by number. The
following table identifies the error codes that may be easily
rectified, probably causes, and possible solutions. If you
receive one of these error codes, follow the recommended
solution, and if the problem persists, you receive any other
error code or experience any other problem with your power
chair, contact your Quantum Rehab Provider.
INFORMATION
WARNING
ERROR
Figure 4. Error Codes
15
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Q-LOGIC 3e and is the answer not in the manual?