Page 5
Identification Key Controller Mode LED On/Off Button Hazard Button Maximum Speed/ Actuator LEDs Profile Indicator Left Turn Indicator Button Joystick Speed Decrease Button Turn Right Indicator Button Speed Increase Button Mode Button Horn Button Battery Condition Meter Light Button Charger Port...
Page 6
NOTE: This product is compliant with WEEE, RoHS, and REACH directives and requirements. NOTE: This product meets IPX4 classification (IEC 60529). NOTE: The R-net and its components are not made with natural rubber latex. Consult with the manufacturer regarding any after-market accessories.
Avoid exposure to rain, snow, ice, salt, or standing water whenever possible. Maintain and store in a clean and dry condition. Disposal and recycling—Contact your Pride/Quantum Rehab Provider for information on proper disposal and recycling of your Pride/Quantum product and its packaging.
Precautionary Guidelines Before operating the R-net Controller, please read the following. These guidelines are provided for your benefit and will aid you in the safe operation of the controller system. Turn off the power to the controller before you are seated in your power chair.
For specific operation of the actuator buttons, refer to “Actuator Adjustment.” Profile Button The profile button is used to change the drive profile. The R-net Controller can be programmed with up to five (5) drive profiles. The current profile is displayed on the LCD screen.
LCD Screen (for Optional Equipment) The R-net provides the user with easily intuited feedback information via the LCD screen. The multi-color bar at the top of the screen displays the battery condition meter (see “Battery Condition Meter”). The middle portion of the screen is the drive screen. The bottom portion of the screen displays the drive profile number and any messages.
You may use an off-board charger to charge your power chair batteries through the 3-pin socket located on the front of the R-net. If you use an off-board charger, the charger current should not exceed 8 amps. Contact your Pride/Quantum Rehab Provider for more information.
NOTE: If the above procedure fails to either lock or unlock the R-net, contact your Pride/Quantum Rehab Provider. Actuator Adjustment The R-net can control optional power accessories such as a power elevating seat or power elevating leg rests using the mode button and the joystick. NOTE: Actuator adjustment may vary depending on the R-net program.
100 times per second. If the R-net detects a problem either in its own circuits or in the power chair’s electrical system, it may decide to stop the power chair, depending on the severity of the problem. The R-net is designed to maximize the user’s safety under all normal conditions.
Care and Maintenance Refer to your power chair owner’s manual for proper cleaning and disposal instructions. Temperature Some of the parts of your power chair are susceptible to extreme changes in temperature. Always keep your power chair between the temperatures of 18°F (-8°C) and 122°F (50°C) Warranty Refer to your power chair owner’s manual for specific information on controller warranty.
Page 20
401 York Avenue Duryea, PA 18642 Canada 5096 South Service Road Beamsville, Ontario L0R 1B3 32 Wedgwood Road Bicester, Oxfordshire OX26 4UL www.quantumrehab.co.uk Australia 20-24 Apollo Drive Hallam, Victoria 3803 www.quantumrehab.com.au New Zealand 38 Lansford Crescent Avondale Auckland, New Zealand 1007 www.pridemobility.co.nz Italy Via del Progresso, ang.
Need help?
Do you have a question about the R-net and is the answer not in the manual?
Questions and answers