Processor And Chipset Overview; Special Features; Recovery From Ac Power Loss - Supermicro H11DSi User Manual

1.2 Processor and Chipset Overview

The H11DSi / H11DSi-NT motherboard offers maximum I/O expandability, energy efficiency,
and data reliability in a 14nm/7nm process architecture, and is optimized for embedded
storage solutions, networking applications, or cloud-computing platforms.
The H11DSi / H11DSi-NT supports the new microarchitecture 14nm/7nm process technology,
which drastically increases system performance for a multitude of server applications.
The EPYC 7001/7002* Series Processors supports the following features:
•
ACPI Power Management Logic Support Rev. 6.1
•
Adaptive Thermal Management/Monitoring
•
PCIe 3.0 w/ transfer rate of up to 8.0 GT/s and SATA 3.0 w/ transfer rate of up to 6.0 GB/s
•
System Management Bus (SMBus) Specification Version 3.1.1

1.3 Special Features

This section describes the health monitoring features of the H11DSi / H11DSi-NT motherboard.
The motherboard has an onboard System Hardware Monitor chip that supports system health
monitoring.

Recovery from AC Power Loss

The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered off (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
17
Chapter 1: Introduction