SAL VoxBox VB 3000 Instruction Manual page 9

MAIN FEATURES
• 18 programmable FM radio stations and MP3 playback • clock and large easy-to-read display • optimized viewing angle • USB/SD/MMC compatibility • music and loud-book
playback • also recognizes MP3 fi les located in subdirectories • quick track search • advanced track memory • song intro / repeat / shuffl e play • intuitive control • 3.5 mm AUX input
for portable devices • 4 x 45 W Hi-Fi speaker output • 2 x RCA external amplifi er/subwoofer output • ISO connector
SETUP
CONTROLS AND CONNECTORS
Figure 1
1. BND/AS
2. 1/PAU
3. 2/INT
4. PWR/MOD
5. 6/+10
6. 5/-10
7. USB
8. CLK
9. 4/RDM
10. 3/RPT
11 SD/MMC
12.
13.
14. DISPLAY
15. RST
16. AUX
Figure 2
1. ANT IN DIN antenna socket
2. RCA OUT Audio output for connecting external amplifi er or active subwoofer
3. ISO IN / OUT Socket accepting ISO connector pair (power and speaker connections)
Figure 3
1. FM1-FM2-FM3 3 FM bands 3 x 6 presets for storing radio stations
2. ALFANUMERIC Volume / Frequency / Time / Track number, Elapsed time / Mode
3. MHz FM radio station frequency unit
4. MP3 MP3 fi le playback in progress
5. AUX 3.5 mm audio input selected
6. USB USB signal source selected
7. SD Memory card selected
8. VU-METER Dual VU meter display
Before using the product for the fi rst time, please read the instructions for use below and retain them for later reference. The original instructions were written in the Hungarian language.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be supervised at all times to ensure that they do not play with the appliance.
After unpacking, please, check the device for possible transport damages. Keep the packaging away from children, if it contains bags or other potentially dangerous components.
RESETTING THE UNIT
The microprocessor data requires resetting in situations where the power supply is lost or the unit (including its display) acts erratically. In order to do so, press the RST (RESET) button at the right edge of the front
panel using a ball-point pen. This will clear all stored data and return the unit to factory default condition. This operation is required after installation, before switching on the unit for the fi rst time, and when the
vehicle's battery is replaced.
OPTIMUM DISPLAY VIEWING ANGLE
The large display has been designed so that the maximum contrast and viewing quality is available slightly off set sideways, aff ording the driver and front passenger the best view. The white characters thus appearing
in front of the black background provide excellent legibility.
POWERING THE UNIT ON AND OFF
Press the rotating knob (PWR / MOD) to power the unit on. It switches on and automatically switches to the mode listened to most recently.
• Since voltage surges can occur when the vehicle's engine is started, only turn on the unit after the engine has been started. Turn off the unit before stopping the engine. To switch the unit off , keep pressing the rotating knob
( ( (PWR / MOD D OFF ) (" " " appears on the display).
• After switching on, the volume setting last used before switching off will be eff ective.
ADJUSTING VOLUME
Use the rotating knob to set the desired volume level.
• The volume can be adjusted in a range of 00 to 32. Unless an adjustment is made within 2 seconds, the unit will automatically revert to the previous function.
SELECTION OF SIGNAL SOURCE
Repeatedly press the rotating knob (PWR / MOD) briefl y to select the desired signal source: TUNER / USB / SD / AUX
• On switching on the unit, the track played prior to switching off will continue playing unless the device containing it has been removed.
• If both the USB and SD sockets are empty, only the TUNER and AUX mode can be selected.
• If there are external devices connected to both the USB and SD sockets, the PWR / MOD button can be used to select between them. The use of SD cards is preferred on account of their secure and protected location on the unit.
• After connecting, the external unit connected last will be the one that will start playing.
• The symbol corresponding to the active signal source illuminates after USB or SD devices are inserted.
RADIO
FM1-FM2-FM3 band selection / Auto station search and store
Radio program memory 1
Radio program memory 2
Radio program memory 6
Radio program memory 5
–
Radio program memory 4
Radio program memory 3
-
Auto / Manual tuning
Auto / Manual tuning
car radio & music player
Volume / Power on and off / Mode switching
Time display / clock adjustment
Multi-functional colour LCD display
Reset to factory defaults
Stereo input socket for 3.5mm jack
9
VB 3000
ZENELEJÁTSZÓ
–
Playback / Pause
Track intro
Forward skip 10 tracks
Reverse skip 10 tracks
Connector for USB storage
Shuffl e playback
Track repeat
memóriakártya-aljzat
Previous and fast reverse
Previous and fast reverse