Antenna Setting For Transponder; Antenna Setting For Motor - Qviart Undro User Manual

2.1.2 Antenna Setting for Transponder

In this menu, Press the Left/Right button or OK button you can see the pre-stored
Transponder list, and you can Select, Add, Delete, Edit Transponders.

2.1.3 Antenna Setting for Motor

Menu->Installation->Antenna Setting->blue button
1) Satellite: Select the satellite which you want to setup.
2) Transponder: Select one TP which has signal.
3) motor type:
DiSEqC 1.2: General motor antenna using DiSEqC 1.2.
USALS: Motor antenna using USALS.
4) Position Index: It can store up to 64 position
5) Position auto: Press the Left/Right button, the motor will drive automatically
until it gets the signal.
6) Continuously move: The motor can drive only when you hold on pressing
the Left/Right button.
7) Step size: Set the driving step.
8) Move steps : Press the Left/Right button, the motor will drive several steps
according to the Step Size.
9) Limit set : You can set the maximum motor limit for both East and West to
prevent damage to the antenna. When you set Disable the Motor limit setting is
released.
10) Save position: Save current position of Motor.
11) Go to position: Drive Motor to the position which you saved previous.
12) Go to reference: Drive Motor to zero point.
13) Go to X.X: Drive Motor according to the USALS Setup.
Red button: USALS Setup
10