Blind Search; Manual Search; Channel; Edit Channels - Qviart Undro User Manual

Tip: You can select multi transponders to search at the same time. And you can
execute Delete, Add or Edit PID functions in this menu according to the help
information.

2.2.3 Blind Search

1. Highlight the satellite or add a new satellite and press the OK button.
2. Press the YELLOW button to start blind search.
3. After searching, it will save all the transponders automatically.

2.3 Manual Search

Menu->Installation->Manual search
1 Satellite: Press Left/Right button to switch the Satellite or press the OK
button to display the satellite list, then use the Up/Down button to highlight the
satellite you want use to search, at last press the OK button to choose the satellite.
2 Frequency: Input the Frequency you want to use.
3 Polarity: Press the Left/Right button to select HOR or VER.
4 Symbol Rate: Input the Symbol rate you want to use.
5 FEC: Press the Left/Right button to select the FEC you want to use.
6 Network Search: You can implement network search if you set YES.
7 FAT Only: Only allows free TV programme if you set YES.
You can press the Red Button to Start the TP Search , and press the Green
Button to do the Antenna Setting, also you can press Yellow Button to edit PID.

3.Channel

3.1 Edit Channels

Menu->Channel->Edit Channels
12