Glossary - Qviart Undro User Manual

levels received.
•[Satellite] Replace the LNB with a lower noise factor in cases where the noise
factor is too high.
•[Satellite] Replace the LNB with a new one in case it is damaged or out of order.
•[Satellite] Check the signal levels and adjust your antenna if the level is too low. The
signal level may be affected by weather conditions.
4. No or poor sound
•Check that your AV/HDMI cable is connected correctly.
•Check the volume levels of your TV set and the product.
•Check if the product or TV is on mute.
•Check audio type or soundtrack option.
5. Remote control does not operate
•To control the product, the top end of the remote control should point directly
towards the receiving part of the product.
•Remove and reinsert the batteries in the remote control.
•Replace the batteries in the remote control for a new set.
6. Cannot connect network
•Make sure the network of your family is good.
•Make sure the Ethernet cable is inserted firmly to the LAN router.
•Make sure the Wi-Fi can work on other device.
•Input the Wi-Fi password again.
•Get auto IP again.
•Restart the receiver again.

Glossary

Antenna
A device that collects and radiates electromagnetic waves, including a satellite dish
and broadband antenna.
EPG
An electronic equivalent to a printed television listings magazine; it is an application
used with digital set top boxes and digital television sets to list current and scheduled
programs that are or will be available on each channel, including a short summary or
commentary for each program. The information supplied in the EPG is sent and
updated by the channel broadcaster.
DiSEqC
DiSEqC (Digital Satellite Equipment Control)system, it is a communication bus
28