Connecting The Antenna; Installation; Antenna Settings - Qviart UNIC User Manual

You can connect one fixed dish LNB directly to the LNB IN, or connect at least two dishes LNB by DiSEqC
Switch.
Figure6. Connecting to Dish
Figure7. Connecting to Dish LNB

4. Installation

You should install the receiver when powering on your product for the first time after purchase.
Tip: The default password is 0000. If you have forgotten your password, please contact your local product
distributor.
Antenna Settings allows you to configure the antenna setting

4.1 Antenna Settings

parameters.
1. Satellite: Highlight the satellite you want to search.
Menu->INTALLATION->Antenna Settings
2. Transponder (TP for short): Press the button to
change the TP.
/
3. LNB Type: Press the button to change the LNB
frequency.
/
4. LNB Power: Press the button to select the required
LNB power.
/
5. 22kHz: Press the button to select ON, OFF or Auto.
6. DiSEqC 1.0: Press the button to select the required
/
DiSEqC1.0 input.
/
5