Output Setting; Other Setting; Record Setting - Qviart Undro User Manual

4.6 Output Setting

TV System: Set the TV system mode.
HDMI Mode: Set the HDMI output mode.
TV Screen ratio: Set the TV Screen ratio.
TV Screen Format: Set the display format according to the screen ratio.

4.7 Other setting

Auto Channel Selection: If you set ON, in the channel list when you highlight the
channel, it will play automatically. If you set OFF, in the channel list when you
highlight the channel, you should press the OK button to play it.
Recall List: If you set ON, when you press the RECALL button, it will display
the channel list you watched previous. If you set OFF, when you press the RECALL
button, it will directly back to the channel you watched last time.
Volume Per Channel: If you set ON, you can set different volume for each
channel. If you set OFF, all channels can only have one volume.
Change Channel Option: If you select Freeze, when you switch channels, it will
display the last frame of the previous channel. If you select Blank, when you switch
channels it will display blank screen.
Auto Check G-Net Update: Set the time frequency to detect new software for
G-Net Update.
APD: If you set On, STB will auto standby without RCU operation for 3 hours. If
you set Off, STB will not auto standby without RCU operation.

4.8 Record Setting

Auto Timeshift: When you use a storage device, if you set on, you can playback
the programme you are watching according to the live buffer size, if set off, you can
not playback the programme.
Live Buffer Size: Set the time limit to manage the live buffer size.
Record lcon display interval time: You can set the interval time of the record icon
showing.
18