Wireless; Setting; Vpn Setting - Qviart Undro User Manual

LAN router If the Network is connected, it should get the correct IP address and
display"Status: Link Up".
Red button Set Off means you can input the IP address by manual, set On means
you can only get dynamic IP.

6.1.2 Wireless

1. Plug in the wireless USB dongle to the USB port.
2. Enter Menu-> Expansion ->Network -> Wireless
If the Network is connected, it should get the correct IP address and display
the"Connect"and the AP name.
Press the Red button to turn on or turn off the wireless network, when you turn on
the wireless network, press the Green button to search new access, Select the network
name of your Wi-Fi access point from the list, Press the OK button, then input the
right password.
6.1.3 3G Setting
Menu-> Expansion ->Network Setting->3G Setting
You can get to 3G net when you plug the 3G net card.

6.1.4 VPN Setting

Menu-> Expansion ->Network Setting->VPN Setting
23