Edit Credentials Of Your Broadsoft Directory - Cisco 7800 Series User Manual

Edit Credentials of Your BroadSoft Directory

Step 2
Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 Do one of the following actions:
• Highlight the BroadSoft directory.
• Highlight one of the configured directories.
Step 4
Press Option.
Step 5 Select Edit Settings.
Step 6
Edit the Host Server field.
Step 7 Press Save to apply the change.
Edit Credentials of Your BroadSoft Directory
When your administrator disables the directory individual mode, the phone only displays BroadSoft directory.
When your administrator enables the directory individual mode, the phone displays all enabled directories
with default or customized names. The default names are:
• Enterprise
• Group
• Personal
• Enterprise Common
• Group Common
Note Only the directory that is enabled by your administrator can display in the Directories screen.
Procedure
Step 1
Press Contacts
Step 2 Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3
Do one of the following actions:
• Highlight the BroadSoft directory.
• Highlight one of the configured directories.
Step 4 Press Option.
Step 5
Select Edit Settings.
Step 6 (Optional) Set the Authentication type to Login credentials or SIP credentials.
Step 7
Enter the user credentials based on the authentication type.
• Login credentials: edit the User ID and Password fields.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
62
.
Contacts