Assembly Instructions - AR Blue Clean AR 390 SS Assembly, Care And Use Instructions

PREPARATION PREPARATION
PREPARATION
Before beginning assembly of product, make sure
all parts are present. Compare parts with package
contents list and hardware contents list. If any part is
missing or damaged, DO NOT attempt to assemble the
product.Please call customer service at 1-866-235-
5112. Replacement parts will be sent no charge.
Estimated Assembly Time: 5 minutes.

ASSEMBLY INSTRUCTIONS

1
A
Power Unit Assembly
Slide the spray gun holster (K) onto left side, when
facing the unit of power washer unit (A).
Note: When placing the gun with the lance attached,
the nozzle will rest in this tray.
6
92733_15ANR014 AR390SS_2000PSI ENG-FR-SP.indd 6
K
Tools Required for Assembly (not included): Phillips
screwdriver and 5/16" (8 mm) allen wrench.
2
AA
J
Slip tab into slot and screw the nozzle tray (J) on bottom
left, when facing the power washer unit (A).
Secure with screw (AA).
Note: DO NOT use a power screwdriver. When the screw
is completely tight, give a small final clockwise twist of
the screwdriver.
DO NOT overtighten.
Hardware Used:
Screw
AA
A
x 1
2018/2/9 上午11:13