Advertisement
Table of Contents
- 1 Items Required for Operation
- 2 Before You Begin
- 3 Accessories
- 4 Installation of Aileron and Flap
- 5 Installation of Stab and Vertical Fin
- 6 Assembling the Fuselage Fuse Fairing
- 7 Installation of Tail Pipe
- 8 Installation of Plane Nose
- 9 Installation of Retract System
- 10 Installation of Fuel Tanks to Fuselages
- 11 Complete Model View
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Top RC Model F-16 Fighting Falcon
Summary of Contents for Top RC Model F-16 Fighting Falcon
- Page 1 第 1 页...
- Page 2 第 2 页...
- Page 3 第 3 页...
- Page 4 3. Glue the horns to the aileron, Connect the horns to the servo arms with the linkage and lock each side with Accessory list for the installation of aileron and flap. screws and nut. Make sure the aileron can at least 30mm up and down movement.
- Page 5 8. Assemble the stab to the fuselage and make sure it can Accessory list for the installation of stab and vertical fin . turn freely . 6. Assemble the servo to the stab servo mount, trim a slot in 9. Assemble the servo of the vertical and install it to the the stab root position of fuselage base on the 3mm ply jig.
- Page 6 11. Glue the vertical alu tubes to the vertical fin. Accessoriesfor assembling the fuselage fuse fairing. 14. Install the screws into the holes of fuse fairing tightly 12. Assemble the vertical fin to the tail fulse . 15. Open the top hatch, lock the fuse fairing to the 13.
- Page 7 18. Put the fiber exhaust into the tail fuselage and lock it Accessory list for the installation of tail pipe. with screws . 19. Fix the tail pipe through assembly the 3mm ply tail 16.Put the tail pipe to the fuselage from the tail fuselage. pipe frame, see pictures below .
- Page 8 20.Assemble the nose frame to the the fuselage with Accessory list for the installation of retract system . screws and nuts. 23.Install the gear door servo to appropriate position in 21.Put the plane nose to the fuselageuntil they fit very the fuselage, connect the fiber horns in the gear doors to well, assemble the antena to the plane nose throught the the servo arms with the linkage and lock each side with...
- Page 9 25.Make sure the gears can be completely put the gear Accessory list for the installation of fuel tanks to fuselages. down and retract the gear up. 28.Assemble the fuel tank 1 to the nose fuselage, and 26. Make sure the gears can be completely retracted connect the main fuselage to the nose fuselage with screws during work .
- Page 10 31.When you need to add some accessories under the 30.Assemble the other two fuel tanks to the main fuselage . cockpit, please remove the nose and pull the steel wires. 32. Adjust the travel of each control surface to the values 33.
- Page 11 35.The picture after the F16 assembly .
Need help?
Do you have a question about the F-16 Fighting Falcon and is the answer not in the manual?
Questions and answers